The Benefits of Using Automotive Timing Belts

Timing Belt - Advantages

• Precision registration and timing with no loss of high torque carrying capability
• Minimal vibration and chordal effect
• Positive slip proof engagement
• Wide speed range, especially important when the entire speed range is developed from a single source
• Virtually no elongation (stretching) due to wear
• High mechanical efficiency, as much as 98% when properly maintained. By contrast, chain drives are in the 91-98% efficiency range, while V-Belts average in the 93-98% range.
• Power transmission efficiency is not lost with use
• Clean operation, no need for lubrication
• Reduced noise
• Long, dependable trouble-free service
• Excellent abrasion resistance
• Rust resistant
• Resists chemicals and contaminants
• Increased drive design options
• Weight savings
• Safety issues
• Economical operations:
  • No need for expensive drive enclosures
  • No need for lubrication systems
  • No need for tensioning devices
  • No adjustment needed due to stretch or wear
  • No cost for lubricant or disposal fees
  • No worn sprocket replacement
  • No ongoing maintenance costs for roller chain
  • Energy savings
  • Reduced costs associated with "downtime" on top of lost productivity

Timing Belt - Disadvantages

Our own experience has shown that the timing belt is not perfect in every situation when comparing it against a chain drive. Being able to recognize timing belt limitations helps us to educate our customers in making the right decisions on their particular applications needs.

If you want to learn more, please visit our website SBT.

• Availability of numerous chain sizes allows for the use of smaller pitch diameters and/or number of teeth while achieving the desired ratio
• Higher speeds and power capacities
• Detachable chain links make installation easier in some instances
• Need for accurate initial alignment of drive components
• No slippage
• Higher drive ratios at shorter center distances
• Lower bearing loads
• Less affected by temperature or humidity
• Less affected by oil and grease

Learn the importance of your timing belt and the benefits of replacing it at the recommended intervals.

Your timing belt helps run many fundamental parts of your car, including the vehicle&#;s engine, alternator, air conditioner and power steering pump.

In older vehicles, the standard timeframe to replace a timing belt is around 60,000 miles. As technology advances, many vehicle manufacturers recommend intervals around 100,000 miles! To confirm your vehicle&#;s recommended timing belt replacement interval, you can check your vehicle&#;s owner&#;s manual, or simply call Wiygul Automotive Clinic.

Replacing your timing belt will provide you and your vehicle with many benefits, including:

Contact us to discuss your requirements of Automotive Timing Belts. Our experienced sales team can help you identify the options that best suit your needs.

1.         Improved horsepower and acceleration

2.         Increased gas mileage

3.         Prevent unexpected and/or more costly auto repairs

Unfortunately, in most cases, there are no obvious signs that a timing belt is going to break. Avoiding a timing belt replacement could cause engine failure, broken or bent valves, cylinder or camshaft damage and possibly piston and cylinder wall damage. These types of repairs could accumulate to thousands of dollars in damage.

Cruise to one of Wiygul Automotive Clinic&#;s 7 locations and let our experienced technicians inspect and replace your vehicle&#;s timing belt with quality service, at affordable prices. Click HERE to make an appointment at one of our 8 locations.

If you are looking for more details, kindly visit Audi Timing Belt Replacement.