&#;&#;Brakes are a crucial component of car safety, and brake pads are one of the most important parts of the braking system. Over time, brake pads wear out and need to be replaced regularly. However, some argue that only the worn brake pad needs to be replaced, without the need for a pair replacement. So, should brake pads be replaced in pairs? Let's delve into this question.
If you want to learn more, please visit our website ALLMAX.
&#;&#;Firstly, let's understand how brake pads work. Brake pads slow down the vehicle by creating friction with the brake disc. Over time, brake pads wear out, reducing the friction with the brake disc. This leads to decreased braking performance, longer braking distances, and increased accident risks.
&#;&#;Replacing only one worn brake pad while the other remains new poses some risks. Firstly, the friction coefficient between the new and old brake pads may differ, resulting in uneven braking. This can cause instability during braking, affecting driving safety. Secondly, the worn brake pad may cause additional wear on the brake disc, further reducing braking performance.
&#;&#;In contrast, there are clear benefits to replacing brake pads in pairs. Firstly, new brake pads ensure the balance of the braking system, providing more stable braking performance. This can reduce braking distances and improve driving safety. Secondly, pair replacement extends the lifespan of the braking system and reduces damage to other brake components.
&#;&#;However, there are some special cases to consider. For example, if one side's brake pad is significantly more worn than the other side, it may be reasonable to replace only the worn side. In such cases, car owners should consult professional technicians for advice to ensure safety and performance.
&#;&#;In conclusion, replacing brake pads in pairs is a wise choice. It provides more stable braking performance, reduces braking distances, and extends the lifespan of the braking system. However, in special cases, replacing only the worn side, based on the advice of professional technicians, is also acceptable.
September 2,
Brake pads and rotors should always be replaced in pairs. Pairing new pads with worn rotors could cause a lack of proper surface contact between the pads and rotors, resulting in noise, vibration, or less-than-peak stopping performance. While there are different schools of thought on this paired part replacement, at ADVICS, our technicians always recommend replacing brake pads and rotors at the same time to keep the vehicle in peak working order, and more importantly, to ensure the braking system delivers the safest and most reliable stop possible.
Although it&#;s recommended to replace brake pads and rotors at the same time, they are ultimately two separate parts and can be worn differently, so it&#;s important to check rotor thickness as part of your inspection.
Rotors must maintain a certain thickness in order to deliver proper stopping power, avoid warping and deliver proper heat dissipation. If rotors aren&#;t measuring thick enough, you&#;ll know immediately that they should be replaced, no matter the condition of the pads.
Regardless of the condition of the rotors, you must also check the brake pads for condition and wear. Brake pads can wear in specific patterns that may indicate problems with the braking system, poor rotor condition and more, so paying close attention to the condition of the brake pads, as well as any wear patterns you can detect, is key.
If pads are worn, or worn in specific patterns, past the point of safety, they should also be replaced regardless of the condition or age of the rotors.
If during inspection you notice that the surface of the rotors looks damaged or uneven, it may be tempting to turn or resurface them &#; an option which can be significantly cheaper than fitting the car with new rotors all together.
Contact us to discuss your requirements of brake pad advertisement bulk. Our experienced sales team can help you identify the options that best suit your needs.
However, turning rotors does impact rotor thickness, and as we know, rotor thickness is a critical component for safe stopping and brake system performance.
If a customer&#;s budget is truly limited and they are not able to afford new rotors, turning can be an option, but is not recommended. You can think of rotor turning as a short-term solution. As the customer continues to drive, and especially if they have just had fresh pads installed, but are using turned rotors, it will only be a matter of time before the rotors will need to be replaced and braking becomes compromised.
The fresh pads will be applying optimal force onto the old, turned rotors, wearing them down more quickly than if they were replaced at the same time as the new brake pads.
Ultimately the decision of whether or not to replace pads and rotors at the same time will have to be handled by individual case.
If pads and rotors are both worn to a significant degree, you should always recommend complete replacement for optimal safety and reliability.
If wear has taken place and a customer&#;s budget is limited, you should take whatever action will provide the safest braking for that customer. In some cases, you may have no option other than to turn the rotors, but always be sure to thoroughly explain the pros and cons of doing so.
Ideally, every brake job should consist of brake pad and rotor replacement for each axle, as needed, using ultra-premium parts that are designed to work together. When replaced at the same time, ADVICS ultra-premium brake pads and rotors deliver 100% same pedal feel as the OE product, up to 51% less braking noise and a 46% longer pad life.
These are just some of the benefits of using ultra-premium products in the shop, which are then directly passed on to the customer when a full brake job is performed, consisting of brake pad and rotor replacement in tandem.
The company is the world’s best BPW Brake Pads bulk supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.