What is the Advantage and Disadvantage of Brake Lining exporter

If you are a brake pad consumer, you may only care about how to replace brake pads. However, for a brake pad importer, distributor or buyer, they are more care about how the brake pads are manufactured and what the most important process for a brake pad is in manufacturing.

ALLMAX contains other products and information you need, so please check it out.

How Brake Pads Manufactured-completely manufacturing process

The post below can help you to learn basic procedures how brake pad are manufactured.

1, Raw friction material

Friction material is the most important for a brake pad. The different factories have their own formula.The formula determines the quality of the products. According to the classification, there are mainly 4 kinds of formulas. Metallic, semi-metallic, ceremic, NAO disc pad formula.(Click here to learn more about disadvantage and advantage of different brake pad formula)

Raw material Friction material

There are many kinds of back plates for disc brake pads, hole back plate, wire mesh back plate, cast iron back plate, NRS back plate. Learn more about steel back plates types of brake pads, click here.

In order to get a clean back plate without oil and rust,  the back plate must be shot blasting before using. then apply glue on the steel back plate surface.

steel back plate cleaning

steel back plate with glue

3, Hot press process

Forming friction materials into a brake pad. Adhering of backing plate with friction material by heat and pressure

Hot Press Process

If you are looking for more details, kindly visit Brake Lining exporter.

Brake Pad Forming Mold

4, Curving

After curving, the formed friction material can reach an ideal brake performance. This is a key process.

Heat treatment

5, Grooving,slotting and chamfering on the brake pad.

To fit the disc brake rotors well. Reduce noise and improve dust.

Grooving and Chamfering

6, Painting

Spraying the powder on brake pad. Automatic painting production line.

Automatic Painting production Line

7&#;Install Indicator

Indicator/sensor installing

8&#;Disc brake pad / brake pad shim MARKING and installing

LOGO Pringting

9, Shrinkage package.

Shrinkage packing

The above is all the steps of the brake pad manufacturing process. If you want to learn more about brake pad, you could visit our web site www.powertech-auto.com

Powertech is one of the best brake pad manufacturers and suppliers for cars and trucks in China. If you are a foreign importer, distributor or buyer, you want to find reliable brake pad manufacturers in China. Welcome to contact us at . 

For more SAF Brake Pads for saleinformation, please contact us. We will provide professional answers.