How to Choose TPMS Sensor Tool?

Three best practices for TPMS sensor replacement

Link to foxwell

There are two main categories when replacing a TPMS sensor: OEM and aftermarket. The automotive aftermarket provides technicians many options when replacing a TPMS sensor and with so many sensor options out there, it is important to determine which technology would work best for your shop.

Before determining which TPMS sensors to invest in for replacement sensors, be sure to invest in a TPMS scan tool, such as a VT56, that can aid in determining which TPMS sensor brands should be used for replacement. The vehicle coverage depends on the TPMS sensor technology, and most shops invest in more than one sensor brand. It is best to use a TPMS tool, such as the VT56 or VT36, that has the ability to read, activate and reset TPMS systems, as well as program more than one type of TPMS sensor brand. With the help of a TPMS scan tool, technicians can stock up on the appropriate sensors by using the following three best practices for TPMS sensor replacement.

1 &#; Determine the TPMS system

There are two types of TPMS systems: direct and indirect. Direct TPMS systems use TPMS sensors inside the wheel to report pressure data to the vehicle&#;s ECU in real time. The direct systems include Asian, domestic and European vehicles. An indirect TPMS system uses an ABS system to monitor the speed of the wheel in order to record tire pressure readings correctly. Indirect systems can include Asian and some European vehicles.

Although there are no TPMS sensors within the wheel for vehicles with an indirect system, a relearn procedure must be performed to turn the TPMS light off. Some TPMS scan tools can help determine whether the system is direct or indirect, and will walk the technician step-by-step on how to reset their vehicle.

2- Choose a TPMS sensor type

To work on any vehicle that comes in the shop for TPMS services, most shops carry more than one sensor brand for the best vehicle coverage. With so many different TPMS sensors in the aftermarket, technicians should know which options are out there to choose what is best for them.

Original equipment (OEM)

OEM sensors are a direct replacement of original manufactured sensors. The ID&#;s are already written to the sensor, therefore, it does not need to be configured before it is installed.

Programmable or Configurable (Aftermarket)

Programmable or configurable sensors are aftermarket universal TPMS sensors. The sensor must be programmed or cloned from an OEM or another aftermarket sensor before use, using a TPMS tool.

• Alligator Sens.it, Standard Qwik, NAPA Qwik, Schrader EZ-sensor® , Orange Universal, MAX T.O.T.A.L., Mobiletron, PDQ, Steelman Select, U-Pro, Myers U-Pro, HUF Intellisens, and Dynamic Pro-Select.

Multi-protocol (Aftermarket)

Multi-protocol TPMS sensors are aftermarket sensors pre-loaded with few sensor protocols. It is a part-for-part replacement. Since the ID&#;s are already written to the sensor, it does not need to be configured before use.

• VDO REDI-Sensor

1:1 (Aftermarket)

One-to-one TPMS sensors are aftermarket sensors that are a direct replacement of an OE sensor with one preloaded sensor protocol. The ID&#;s are written to the sensor and does not need to be configured before use.

• Dill OE, Standard OE, NAPA OE-Design, and Orange Direct Fit.

Sensor must be programmed or cloned from OE or another aftermarket sensor before use. (Programmable sensors have no protocols written to the sensor, whereas configurable sensors have several protocols written to the sensor.)

Comes pre-loaded with few sensor protocols. Does not require configuring before use.

Comes with one preloaded sensor protocol. Does not require configuring before use.

Direct replacement of original manufactured sensor. Does not require configuring before use.

Not a direct (part for part) replacement

For more information, please visit TPMS Sensor Tool.

Part for part replacement

Part for part replacement

Direct (part for part) replacement

Yes

No

No

No

Yes

No

Depends on TPMS sensor brand

No

Yes, unless the sensor is cloned

Yes

Yes

Yes

Using a TPMS scan tool, users can create or clone the TPMS sensor ID&#;s for programmable or configurable sensors. The technician will need to perform a relearn procedure to write new TPMS sensor ID&#;s to the vehicle&#;s ECU. The steps on how to perform the relearn procedure are sometimes written in the VT56 TPMS Tool, or can be found in the owner&#;s manual.

3 &#; Choose the correct TPMS sensor frequency

TPMS sensors are available in two frequencies: 315MHz and 433MHz. TPMS signals transmit at 433MHz in Europe and at 315MHz in most parts of the world. When replacing a TPMS sensor, be sure to verify it has the correct electromagnetic wave frequency for the vehicle system. Using the wrong frequency will result in a failed relearn procedure and/or failed sensor programming. A TPMS tool, such as the VT31, VT36 and VT56, have the ability to determine the frequency of the old or new sensor.

There are a few simple ways to determine which sensor frequency a vehicle uses by using your TPMS tool.

• Read or activate the sensor, and the frequency information will be displayed on the tool.

• Use the &#;program sensor&#; function to determine which sensor frequency should be used when replacing the sensor, determined by the vehicle&#;s Make, Model, and Year.

Verifying the frequency helps technicians determine which brands of sensors to invest for the future. Some TPMS models and model years from the same automaker use different frequencies. For example, a Nissan Rogue uses 315MHz sensors, and a Nissan Rogue uses 433MHz sensors. Once it is determined which frequency is used, a TPMS tool will display which brand of sensors has coverage for the vehicle by Make, Model and Year.

We've used the sensors on GM's, Ford's, Toyota's, pretty much everything except euro stuff so far. I dont see why they would not work though given the tool has the ability to deal with them. You do need the Autel tool to program the Autel sensors. Pretty much most if not all aftermarket sensors are that way, as I understand it.

GM vehicles are easy to relearn and it's fairly simple, the MX808 appears to be a full out scan too,l so that may be the why for the 20$ tool (more handy/portable).

If you want to learn more, please visit our website tire pressure measurement tool distributor.