This chapter delves into the concept of timing belts, examining their design and functionality.
SBT Product Page
A timing belt is crafted from rubber and features durable teeth, engineered to engage with the cogwheels of camshafts and crankshafts. As an essential part of an internal combustion engine, it synchronizes the camshaft and crankshaft rotations, ensuring that engine valves open and close with precision during the intake and exhaust strokes of each cylinder.
In an interference engine, timing belts are crucial for preventing piston-valve collisions. A typical timing belt is a toothed belt, often with teeth on one or both sides.
Timing belts typically consist of two primary components: molded cords for carrying torque and a plastic compound that forms the teeth and encases the cords. The materials selected vary depending on the intended application of the belt. Generally, timing belt cords are made from fiberglass, polyester, or Kevlar, transmitting power throughout the drive system.
The cords and teeth align perpendicularly, allowing effective linear power transmission. An example is the serpentine belt in car engines. In smaller applications, due to the cords' robustness, belt stretch is virtually negligible despite handling substantial loads. Excessive stress can result in cord failure or cause belt teeth to skip on the pulley. During production, timing belts are formed in a mold, where plastic surrounds a pre-tensioned cord and precise tooth profiles.
Each belt requires a mold with precise tooth count, producing a seamless length. Molds create sleeves as wide as 36 inches, trimmed using slitting tools to desired widths. For food processing, urethane belts meet FDA standards with optional translucency, concealing particles unlike black neoprene belts.
Neoprene serves as the standard material for timing belts due to its superior wear characteristics and ability to maintain the molded tooth profile. Often, neoprene belts are covered with nylon to further reduce wear. For low-dust environments like offices or medical facilities, engineered polymers such as EPDM are preferred, with nylon-coated teeth ensuring accurate profiles and minimal dust generation.
Durable timing belt teeth are vital for synchronizing crank and cam shafts and are available in various metric pitches. Pitch is the distance between two adjacent tooth centers on a belt, affecting pulley characteristics like diameter and tooth count. Historically, timing belts featured trapezoidal tooth shapes.
Newer manufacturing methods have introduced curved tooth designs to combat noise and enhance belt longevity. Additionally, narrower belts can reduce weight and decrease friction while improving performance.
The tooth configuration varies according to specific application demands and environmental factors.
The trapezoidal design is among the earliest, while modern belts increasingly use curvilinear profiles.
Trapezoidal teeth excel in force transmission but wear rapidly under high torque and speed due to their blunt geometry. Despite their limitations, trapezoidal teeth are preferred for applications like precision conveying and linear positioning.
Curvilinear teeth provide a smoother shape, reducing tension loss and minimizing force concentration. However, they are prone to backlash, seen as excessive play between belt teeth and pulley grooves, which can affect accuracy and belt performance.
These belts blend curvilinear and trapezoidal designs, featuring shallower teeth and steeper sides for high-speed, high-torque applications while maintaining durability. They are often the choice for tough industrial needs.
Steps typically involved in designing timing belts include:
The initial step involves identifying the drive’s peak torque, usually tied to the motor's startup torque. Factor in any potential shock loads during operation.
Next, determine the largest feasible pulley diameters, considering space constraints and drive ratio, which enhances torque capacity and prolongs belt life.
Select the belt's tooth profile. If nearing the torque capacity limit, opt for a profile with a higher rating. The chosen profile's pitch determines the necessary belt teeth count.
Calculate Teeth in Mesh (T.I.M.) considering the mesh factor. Divide peak torque by this factor for the design torque, and verify belt pitch to ensure compliance with pulley limits.
Compute belt pitch length using the separation between drive component centers.
Divide belt pitch length by the selected tooth pitch and round to the nearest whole number, representing the belt's total teeth. Adjust drive design’s nominal center to fit the belt.
Calculate effective tension (Te) using the smallest loaded pulley's pitch radius and design torque.
Select an application-specific strength factor, and divide effective tension by this factor to determine required belt break strength. Double for a double span break, and ensure the reinforcement type and belt width exceed calculated strength.
Select a belt width capable of handling design torque with the selected pulley size, ensuring the system's required width is the greater option.
Belt length is computed with known pulley diameter and central spacing between driver and driven pulleys.
The belt length formula is:
Length = 2L + 1.57d₁ + d₂ - (d₁ - d₂)² / 4L
Where:
d₁ and d₂ indicate the timing pulleys' diameters,
L represents the space between timing pulley centers.
Common materials used in timing belt construction include:
Rubber is the most common material for timing belts in numerous industries and vehicle engines. Despite its popularity, rubber experiences longevity issues under high temperatures and exposure to motor oil.
Technological advancements have introduced heat-resistant rubber variants, enhancing belt durability and deformation resistance. Modern rubber and reinforcing fibers bolster strength and traction, preventing damages like sheared teeth.
Polyurethane is renowned for its high temperature resilience, superior elasticity, and oil resistance, making durable timing belts for diverse applications.
Polyurethane belts offer substantial tensile strength and increased load capacity, key for optimum torque generation. These easily maintained belts are favored for power transmission and conveyor systems.
Fabric timing belts suit high-performance or rapidly accelerating applications, offering varied materials, excellent tensile strength, low friction, and resistance to extreme temperatures.
Timing belts are vital for engine operations, linking the camshaft to the crankshaft to control pistons and valves. Essentially, a timing belt is a reinforced rubber belt with internal teeth or notches.
Timing belts ensure precise synchronization of engine valve timings. As the crankshaft rotates, it drives the timing belt, which turns the camshaft to orchestrate valve operations for piston movement. In a four-stroke engine, the phases include intake, combustion, compression, and exhaust. During intake, air and fuel access the cylinders with open intake valves, while exhaust valves stay shut.
During combustion and compression, the air-fuel mix compresses and ignites with all valves closed. During exhaust, gases exit through the open exhaust valve with closed intake valves. The timing belt manages critical valve and piston actions to maintain the correct phase sequence.
```This chapter will explore the different types of timing belts and the potential causes of their failure.
The types of timing belts include:
Open-ended timing belts come in various materials, including extruded thermoplastic polyurethane. These belts are dimensionally stable, making them ideal for linear drive systems due to their precise positioning capabilities.
Open-ended timing belts exhibit a high spring rate and excellent tooth shear strength. For linear drives requiring high stiffness and repeatability, steel tension members are preferred over aramid fiber. The Move-Series AT10 or AT15 are the stiffest and strongest options available. These belts come in 50-meter rolls or can be cut to specified lengths.
For many general-purpose applications, spliced and welded timing belts are commonly used. These belts are preferred for conveying, as well as for profiles and backings that require welding. The construction process involves starting with a length of roll stock, which is open-ended and features finger splices cut into the belt. These splices are then welded together using heat to form a continuous belt.
Spliced and welded timing belts feature the same sealed edges and smooth back as open-ended timing belts. Despite being welded, they retain about 50 percent of the strength of truly endless belts. These belts can be purchased in one-tooth increments for minimum lengths.
Truly endless polyurethane timing belts are extruded without any welds, making them the strongest construction type. This characteristic makes them particularly suitable for power transmission applications. These belts typically include steel tension members and are available in various materials.
The AT tooth configuration is widely recognized for its enhanced tooth shear strength. Double-sided timing belts are available for drive systems with changing shaft directions. These belts may have unsealed edges, and upon close inspection, a pin-hole may be visible where the tension member exited the belt during the extrusion process.
Manufacturers recommend specific intervals for timing belt replacement, usually between 30,000 to 50,000 miles. Failure to replace the timing belt on time can lead to a complete engine breakdown or catastrophic failure, especially in interference engines. It's essential to consult the vehicle's maintenance manual for the appropriate replacement intervals.
It's common to replace the timing belt tensioner simultaneously with the belt. In some engines, where the timing belt also drives the coolant pump, the coolant pump is often replaced as well. Common timing belt failure modes include delamination and unraveling of the fiber cores or stripped teeth. Stripped teeth cause the belt to slip on the drive cog. Although timing belt breakage is rare due to the high tensile strength of the fibers, the belt can wear prematurely from debris mixed with oil and grease.
Proper belt tension is crucial for the timing belt’s longevity. A belt that is too loose will whip, while one that is too tight will cause whining and excessive strain on the cog bearings, both of which significantly shorten the belt's lifespan. Additionally, failures in the belt tensioner, gear, or idler bearings can cause the belt to derail.
When replacing a timing belt, careful attention must be paid to ensure proper synchronization of valve and piston movements. Incorrect synchronization can lead to valve timing issues, resulting in collisions between valves and pistons in interference engines.
The various causes of timing belt failure include:
One of the primary causes of timing belt drive failure is misalignment. This can result from uneven or excessive tooth wear, tensile failure, and improper belt tracking. To extend the lifespan of your timing belt and minimize downtime, ensure that your shafts and timing pulleys are properly aligned.
Excessive load is a common cause of tooth shearing in timing belts. Such loads or shock loads can also lead to uneven and excessive tooth wear, as well as tensile failure. To address this issue, it is necessary to redesign the drive system to better handle the load.
Ratcheting, or the skipping of teeth, occurs when a timing belt is under-tensioned. This condition leads to excessive or uneven wear of the teeth and increased drive noise. To ensure proper tension, use a tension gauge to adjust the timing belt accordingly.
Excessive vibration or noticeable belt stretch in a timing drive may indicate a weak drive structure. To address this issue, reinforce the drive structure to stabilize performance and prevent further problems.
Damaged or worn pulleys can significantly reduce the lifespan of a timing belt. Worn teeth on the pulleys can cause the belt to wear unevenly or become damaged. Nicks or gouges on the pulleys can also cut into the belt. Regular inspection and timely replacement of any worn or damaged pulleys are essential to maintain the integrity of the timing belt.
Want more information on Automotive Timing Belts? Feel free to contact us.
Debris is often an overlooked cause of timing belt failure. Dirt and rust can abrade the belt and oil can damage the belt materials. To prevent such issues, clean the pulleys and timing belt regularly with a stiff brush to remove rust and dirt, and wipe off any oil or grease. Additionally, fitting a shield to the drive can help protect against debris and extend the lifespan of the timing belt.
The various symptoms that indicate a timing belt is nearing failure include:
If you hear only the starter motor engaging but the engine does not turn over when you turn the key, it may be a sign that the timing belt is failing.
A broken timing belt may cause a continuous ticking or clicking sound coming from the engine.
Misfiring is a common issue with malfunctioning timing belts. If the belt slips on the camshaft drive, it can cause the engine’s cylinders to open or close prematurely, affecting the engine's firing rate.
These noises might occur only when the vehicle accelerates or when braking, in contrast to a constant ticking sound that persists regardless of the vehicle's speed or braking status.
This chapter will discuss the applications of timing belts, including their advantages and disadvantages when compared to flat or round belts. Considerations when selecting timing belts will also be discussed.
Timing belts are used in a range of applications, including:
Timing belts are integral to the timing belt and cam belt systems found in most automobiles worldwide. The efficiency of these timing belts is crucial to the mobility of the modern world, as they ensure the smooth operation of vehicles. Automotive timing belts are high-performance, toothed belts designed for precision.
These belts are made from specialized materials to synchronize the rotational motion of the engine's crankshaft with its camshaft. This synchronization is essential for the proper opening of the intake and exhaust valves in the engine's combustion chambers at the exact moments of expansion or compression. Proper coordination is vital for sustaining the engine’s combustion process and maintaining its performance. If the timing belt fails, combustion cannot occur effectively.
Timing belts must maintain precise synchronicity and perform reliably at high rotational speeds. They need to be robust enough to withstand high temperatures and operate effectively in the varied conditions encountered on the road.
A notable example of a belt-driven system is the treadmill. It's important not to confuse the timing belt with the tread on which the runner runs. The timing belt in this context refers to the toothed, synchronous belt that transmits rotary motion from the central motor to the drive pulley. Typically located at the rear of the treadmill, though sometimes at the front, this timing belt is crucial for the treadmill's operation. Both flat friction timing belts and toothed belts can be used in treadmills.
A sewing machine is a common example of a belt-driven system. In this case, the timing belt transfers motion between the sewing pulleys and the motor. While it may not operate under the high performance and load conditions of systems like treadmills or automobiles, it effectively demonstrates the use of synchronous timing belts. The belt system in a sewing machine transmits the rotary motion from the main drive motor to the larger spool head, which then powers the sewing mechanism.
Timing belts are also utilized in 3D printers, conveyor systems, CVT automatic transmission and industrial automation products.
When comparing timing belts to flat or round belt drives, they may have certain disadvantages, such as:
However, these disadvantages are outweighed by the benefits which include:
When selecting a timing belt, several considerations should be taken into account, including:
Clearly seen, there are many different materials used in timing belts due to their own different specifications to which they can handle certain circumstances. As already mentioned earlier, the different types of materials for timing belts include urethane, neoprene, rubber, fabric etc. Each material has its own unique properties that make it the most suitable for a particular application.
In addition to the type of material, several other characteristics must be considered when choosing a timing belt, as these factors affect the smooth operation of the equipment. These characteristics include:
Belt width influences the potential tracking force of the timing belt. Wider timing belts generate greater tracking forces, enhancing their capability to handle higher loads.
Shorter belts exhibit greater tracking forces due to the stronger connection between the tensile cords and the belt molds.
Smaller pulleys generate higher tracking forces. To ensure proper operation, the diameter of the pulley should be larger than that of the belt.
The magnitude of the belt installation tension is crucial due to the impact of various torque loads experienced by the timing belt during operation. Proper tension ensures effective belt tracking and performance.
Timing belts are quite delicate and can be easily damaged if the operating environment is harsh. Factors such as dust particles can interfere with their function, potentially leading to malfunctions in the timing belt system.
The performance of a timing belt is highly dependent on its application. Not all materials are suitable for every industry’s requirements, so it is essential to choose a timing belt that matches the specific demands of the application.
This pertains to selecting between a standard design or a custom design for the timing belt. The choice of design depends on the level of precision required for the application.
Timing belts come in many different types with each type suitable for a certain application. Each timing belt is made out of a specific type of material that makes it perform best in a certain or particular environment. If you are to choose a timing belt for a particular application, always consider the type of material it is made from. This ensures optimal results in the performance of the timing belt for the particular application you choose it for. The replacement of a timing belt is also critical and time reliant.
When buying a timing belt kit there are some questions: Should I replace the water pump at the same time as the timing belt?
The water pump is directly adjacent to the timing belt in most engines. Because getting to the timing belt is such a labor-intensive job, it’s a good idea to take this opportunity to replace the water pump at the same time because of the effort required to get down to either one of these items. Besides, both of these items tend to have a similar lifetime. For this reason, doing this labor-intensive job at the same time is the smart play.
But… What happens If I don’t replace the water pump?
Not replacing all the components during a timing belt change means if the water pump does go at a later point, you will have to pay for the same labour twice because probably the water pump has worn out because of use anyway, and will need replacing sooner than later.
That’s why at Industrias Dolz we always recommend to get both, the timing belt and the water pump, replaced at the same time.
The advantage of this dual replacement is to offer the best long-lasting repair while preventing risks of engine breakage. And last, but not least, more savings for your pocket.
Let’s see below this three things to consider when choosing a timing belt and water pump replacement:
First and foremost, do your research. There are some key features that increase the likelihood of your new timing belt kit becoming a successful choice.
Don’t hesitate, choose an all-inclusive kit. It’s better to know that your timing belt kit contains all components you need for its renewal. Not just the timing belt itself.
Another factor to consider before ordering is the part number. Make sure the kit is the correct one and it fits with your vehicle.
A new timing belt kit gives you peace of mind that your vehicle will run optimally for a long time. For that, there are some aspects you should closely look at to make sure you have an excellent result. With the proper parts, your engine will last for many years.
Below are some of the most important points you should consider before choosing a timing belt kit.
Experience and capabilities are two important aspects to consider when choosing the right manufacturer of your timing belt kit.
It’s important also that they have the expertise for your specific product. And also other additional supports as technical specifications of the product to identify exactly how the item(s) should turn out, comfort guarantee and quality.
So, as you can see, a manufacturer with years of history can offer you backed by a wide knowledge and many years of experience.
The quality of the raw materials used in manufacturing distribution kits will be vital for its lifetime, providing extended durability and proper performance. The manufacturer must ensure the materials are acceptable for use because if the products are manufactured with low-quality, they will not stand up and you won’t get the expected result.
Dolz are committed to quality! Let’s see below:
In terms of quality, OE parts are beneficial to the performance of a vehicle.
Premium OE quality components are engineered and manufactured to the highest standards to perform according to OE vehicle manufacturer intended.
Non-genuine components do not have the same performance guarantees and as a result, due to a low quality the replacement of the elements will take place multiple times over the lifespan of OE quality parts.
For this reason, at Industrias Dolz we make several inspections at various stages during the OE quality manufacturing process to ensure that our products always meet specifications.
Download our Timing belt kits catalog!
DOLZ’s range of timing belt kits is now available with and without water pumps. Each Dolz kit includes all the components required for the replacement: water pump and gasket when necessary, OE supplier timing belt, idlers and tensioners matching OE standards, and all components required for the mounting (screws, bolts, and mounting tips when needed).
Knowledge and experience at your service. With more than 200 distribution kits representing top sales in Europe and a wide range offering 90% coverage of the European fleet.
Features:
With Dolz Kits, you will find two options available: All-include kits with water pump (KD) and the option without water pump (SKD). Both options are manufactured to the same specifications as OE and are guaranteed for 2 years from date of purchase or 50.000 km
Did you miss the DOLZ Kits Unboxing on our Youtube’s Official Channel? Have a look!
Dolz kits include all what you deserve.
If you are looking for more details, kindly visit Audi Timing Belt Replacement.