5 Reasons Why Your Business Needs 2100mAh li socl2 battery？

Check now

Lithium thionyl chloride (Li-SOCl2) batteries are well-regarded for certain applications due to their specific advantages, but they also come with some drawbacks. Here's an overview:

Advantages:

• High Energy Density: Li-SOCl2 batteries have one of the highest energy densities of any primary battery type, making them ideal for applications requiring long-term power in a compact form.
• Long Shelf Life: They feature excellent shelf life, often exceeding 10 years, due to their low self-discharge rate. This makes them suitable for emergency systems and applications where changing batteries is difficult.
• Wide Temperature Range: Li-SOCl2 batteries can withstand temperatures ranging from -112 ° F up to +257° F. This makes them ideal for use in industries such as 
  1. Aerospace
  2. Automotive
  3. Oil and gas exploration
  4. Military equipment
  5. and other harsh environments where temperature fluctuations are common.
• High Voltage: They provide a high nominal voltage of about 3.6 volts, which can reduce the number of cells needed in battery packs.
• Good Load Characteristics: Li-SOCl2 batteries can handle both low and high load currents, although they are generally more efficient at steady, lower currents.

Disadvantages:

• Safety Concerns: One of the primary concerns with Li-SOCl2 batteries is their potential safety hazards, including risk of explosion or fire if misused or damaged, due to the reactive nature of lithium metal.
• Cost: These batteries tend to be more expensive than other primary battery types, which can be a consideration for cost-sensitive applications.
• Limited Applications: Although they can handle pulse applications with proper design, Li-SOCl2 batteries are primarily suited to low to medium continuous discharge scenarios rather than high-drain applications.
• None-rechargeable: Being primary batteries, they are not rechargeable, necessitating complete replacement once depleted.
• Passivation: The batteries can experience a phenomenon called passivation, where a film forms on the lithium surface, potentially leading to voltage delays when current is suddenly drawn after a period of inactivity.

Overall, Li-SOCl2 batteries are excellent choices for applications where longevity, reliability, and high energy density are required, such as remote sensors, medical devices, and utility meter applications. However, they must be selected and managed with care due to their higher cost and safety considerations.

If you are new to Li-SOCl2 batteries:

A Li-SOCl2 battery refers to a lithium thionyl chloride battery, which is a type of primary (non-rechargeable) lithium battery. It is composed of a lithium metal anode and a thionyl chloride (SOCl2) cathode, with an electrolyte composed of lithium tetra chloroaluminate (LiAlCl4) dissolved in thionyl chloride.

What is the difference between Li ion and Li SOCl2 batteries?

The main differences between lithium-ion (Li-ion) batteries and lithium thionyl chloride (Li-SOCl2) batteries stem from their design, chemistry, applications, and performance characteristics. Here's a comparison:

Chemistry and Design

• Li-ion Batteries:

  • Rechargeable: Unlike Li-SOCl2, Li-ion batteries are rechargeable, allowing them to be used repeatedly.

  • Chemistry: Comprised of a variety of chemistries, such as lithium cobalt oxide (LiCoO2), lithium iron phosphate (LiFePO4), and others, with a liquid or gel-like electrolyte.

  • Voltage: Typically operate at a nominal voltage of 3.6 to 3.7 volts per cell.
    
    

• Li-SOCl2 Batteries:

  • Non-rechargeable

    : These batteries are primary cells and are not designed to be recharged.

  • Chemistry: Consist of a lithium metal anode and a thionyl chloride (SOCl2) cathode with lithium tetra chloroaluminate as the electrolyte.

  • Voltage: Provide a nominal voltage of about 3.6 volts per cell, similar to Li-ion.

Performance

• Li-ion Batteries:

  • Energy Density: High energy density, making them ideal for portable electronics, like smartphones and laptops.

  • Cycle Life: Can be discharged and recharged hundreds to thousands of times depending on the specific chemistry.

  • Temperature Range: Typically operate best within a narrower temperature range and may require thermal management systems in some applications.
    
    

• Li-SOCl2 Batteries:

  • Energy Density: Even higher energy density than Li-ion for primary cells, suited for applications where weight and space constraints exist and where long operational life is required.

  • Shelf Life: Known for extremely low self-discharge rates and a long shelf life, often over 10 years.

  • Temperature Range: Will operate reliably over a much wider temperature range compared to Li-ion batteries (-55°C to +85°C).

Applications

• Li-ion Batteries:

  • Commonly used in consumer electronics, electric vehicles, and grid storage due to their rechargeability and reasonable energy density.
    
    

• Li-SOCl2 Batteries:

  • Predominantly used in applications where batteries must last for many years without maintenance, such as remote sensors, military and aerospace applications, and utility meters.

Safety

• Li-ion Batteries:

  • Require careful charging and discharging management to prevent overheating and fires, often incorporating electronic safety circuits.
    
    

• Li-SOCl2 Batteries:

  • Generally considered safe under normal conditions, but they must still be handled carefully as they can pose risks of explosion if punctured or short-circuited.

In summary, the choice between Li-ion and Li-SOCl2 batteries depends largely on the application requirements regarding energy density, rechargeability, operational lifespan, and environmental conditions.

How long do Li-SOCl2 batteries last?

Li-SOCl2 batteries are known for their excellent longevity, which can be attributed to their low self-discharge rate. The life of a Li-SOCl2 battery can vary depending on several factors, including usage pattern, environmental conditions, and the specific design of the battery itself. However, here are some general guidelines:

• Shelf Life: Li-SOCl2 batteries typically have a shelf life exceeding 10 years, and in some cases, they can last up to 20 years under optimal storage conditions.
• Operational Life: During use, the battery life will depend largely on the application and discharge conditions. For applications drawing low continuous current (such as many remote sensors or backup systems), these batteries can continue to function effectively for 10 to 20 years, thanks to their high energy density and minimal self-discharge.
• Temperature Effects: Extreme temperatures can affect battery life. While these batteries perform well across a wide temperature range (from around -55°C to +85°C), frequent exposure to higher temperatures may reduce their effective lifespan.

Overall, Li-SOCl2 batteries are ideal for applications where long-term power is required, and battery replacement is challenging or undesirable. Their lifespan makes them particularly suitable for long-term, low-drain applications.

Does PHD Energy manufacture Li-SOCl2 batteries?

PHD Energy is known for manufacturing high quality Li-SOCl2 batteries. They produce a range of battery solutions including lithium thionyl chloride batteries, which are used in various applications like

• Metering
• Security systems
• Industrial equipment

PHD Energy's offerings in the Li-SOCl2 category focus on delivering high energy density and long-term reliability, fitting the needs of applications requiring long-lasting power with minimal maintenance. https://phdenergy.com/li-socl2-battery/

SUNJ ENERGY Product Page

Why is PHD Energy the best company to manufacture and supply batteries?

The MaRCTech2 team proudly represents PHD Energy, a company of excellence. Several factors distinguish them as a commendable choice depending on specific needs:

1. Product Range: PHD Energy offers a wide range of battery solutions, including Li-SOCl2 batteries, that cater to various applications like industrial, medical, and consumer electronics. This diversity allows them to meet the needs of different customers effectively.
   
   
2. Quality and Innovation: PHD Energy invests in research and development to produce high-quality, reliable products. PHD Energy has built a reputation for delivering innovative battery solutions that focus on high energy density, long life, and safety.
   
   
3. Customization and Support: PHD Energy provides customized battery solutions and strong customer support, which is a significant advantage for businesses needing tailored solutions and reliable service for their specific power requirements.
   
   
4. Industry Reputation: A strong track record and good standing in the industry makes PHD Energy a preferred supplier.
   
   
5. Global Reach and Logistics: PHD Energy can efficiently supply products globally with robust logistics and responsive customer service, they are favored by companies operating in multiple regions.
   
   
6. Sustainability Practices: PHD Energy emphasizes environmental responsibility and adopt sustainable practices for those looking to partner with socially responsible suppliers.

Ultimately, we, at MaRCTech2, consider PHD Energy as the best company to meet your specific needs and preferences. They offer excellence when considering factors such as price, availability, customer service, and alignment with company values.